2 thoughts on “How to choose a diamond ring to select the method of diamond ring custard”
Harriet
Precautions for buying diamond rings Is to understand the merchant. It is necessary to carefully check the company name, address, contact information provided by the merchant, etc., for the merchant's announcement of a member of a certain association or cooperation with a certain enterprise and institution, you can call to verify. It must ask for and check the relevant information when buying. These materials are the identity card of the diamond ring. Including the diamond appraisal certificate, the number of jewelry numbers and invoices, and the mark of the diamond ring itself: the quality of the manufacturer code, purity, material, and the main diamond (more than 0.10 carats) inlaid with jewelry. If the diamond cannot print the mark due to small reasons, it should be attached to the mark containing the mark content. Due to the "carat premium", when the diamond reaches a certain integer weight, the price will grow. Therefore, some operators marked the 0.492 carat diamonds to 0.50 carats, and the diamonds of 0.194 carat were marked to 0.20 carats to earn a high price difference. The professional knowledge of jewelry products such as diamonds before purchasing, such as the standards of color, clarity, cutting, weight, etc., which are usually referred to as 4C standards, as well as platinum and platinum correct majors In order to obtain a low -quality diamond ring at the same time, it will not suffer at the same time. The diamonds inlaid, the original defects may be covered, and the detection unit cannot weigh its actual weight. Therefore, when consumers buy diamond jewelry, especially high -end jewelry of more than 0.5 carats, they should try to choose products with naked diamond appraisal certificates. The choice of diamond tract The larger the diamond, the more 18K should be inlaid. The diamond ring holds the high hardness of 18K and is inlaid firmly. The value of the diamond is not reflected in the purity of platinum. ThePT950 indicates that it is pure platinum (in fact, a small amount of other metals is added), but most of the inlaid diamonds use 18K gold because its hardness requires the hardness of its hardness. It is much higher than platinum. If you use PT950 to inlay diamonds, there is no practical significance except for expensive prices, and it is not hard enough to scratch. Diamond buckles are easy to loosen, so few businesses are willing to use pure gold to inlay diamonds internationally. The analysis from the material of the diamond ring inlaid to analyze the 18K better than the PT950. Because the hardness of 18K gold is high, the ring is not easy to deform flowers, and the inlaid diamond is firm. The reason why 18K gold does not accept is mainly because the purity is low (including 75%gold), but since it is a diamond ring, the main price is on the diamond. safe. 18k to make a precepts is easy to turn yellow. It is necessary to go to jewelry dealers regularly to maintain regular maintenance. 18K gold itself 75%of gold, 25%platinum, copper, nickel and other precious metals, the color depends on the 25%formula, generally light yellow and white. For the beautiful and durability of the jewelry, it is often plated in the appearance of the jewelry. In daily life, it will lead to layer wear (doing housework, cosmetics). After that, the original pale yellow will be exposed, which is normal. icides to the salesperson cleaning the electroplating, it is OK, and this is related to individuals. Some customers have not changed yellow after wearing it for 3-4 years. It appeared, in fact, because the maintenance of the ring was not in place, try not to let the ring come into contact with cosmetics and other chemicals. Furthermore, even the PT950 ring will be a bit dull after wearing it for a long time, so there is no need to worry about the problem of 18K out of color.
Enjoy jewelry, Le Dafu Diamond Custard should choose the one that suits you. Finger slender people are suitable for simple and generous styles, and they look slender and soft; those with relatively thicker fingers are not old, and they are also suitable for such wedding diamond rings. The fingers are round and elder, suitable for wedding diamond rings with a wider ring wall, and the style of the diamond ring requires a certain shape. M common diamond ring trachatings include gold, platinum and K gold;
Precautions for buying diamond rings
Is to understand the merchant. It is necessary to carefully check the company name, address, contact information provided by the merchant, etc., for the merchant's announcement of a member of a certain association or cooperation with a certain enterprise and institution, you can call to verify.
It must ask for and check the relevant information when buying. These materials are the identity card of the diamond ring. Including the diamond appraisal certificate, the number of jewelry numbers and invoices, and the mark of the diamond ring itself: the quality of the manufacturer code, purity, material, and the main diamond (more than 0.10 carats) inlaid with jewelry. If the diamond cannot print the mark due to small reasons, it should be attached to the mark containing the mark content.
Due to the "carat premium", when the diamond reaches a certain integer weight, the price will grow. Therefore, some operators marked the 0.492 carat diamonds to 0.50 carats, and the diamonds of 0.194 carat were marked to 0.20 carats to earn a high price difference.
The professional knowledge of jewelry products such as diamonds before purchasing, such as the standards of color, clarity, cutting, weight, etc., which are usually referred to as 4C standards, as well as platinum and platinum correct majors In order to obtain a low -quality diamond ring at the same time, it will not suffer at the same time.
The diamonds inlaid, the original defects may be covered, and the detection unit cannot weigh its actual weight. Therefore, when consumers buy diamond jewelry, especially high -end jewelry of more than 0.5 carats, they should try to choose products with naked diamond appraisal certificates.
The choice of diamond tract
The larger the diamond, the more 18K should be inlaid. The diamond ring holds the high hardness of 18K and is inlaid firmly. The value of the diamond is not reflected in the purity of platinum. ThePT950 indicates that it is pure platinum (in fact, a small amount of other metals is added), but most of the inlaid diamonds use 18K gold because its hardness requires the hardness of its hardness. It is much higher than platinum. If you use PT950 to inlay diamonds, there is no practical significance except for expensive prices, and it is not hard enough to scratch. Diamond buckles are easy to loosen, so few businesses are willing to use pure gold to inlay diamonds internationally.
The analysis from the material of the diamond ring inlaid to analyze the 18K better than the PT950. Because the hardness of 18K gold is high, the ring is not easy to deform flowers, and the inlaid diamond is firm. The reason why 18K gold does not accept is mainly because the purity is low (including 75%gold), but since it is a diamond ring, the main price is on the diamond. safe.
18k to make a precepts is easy to turn yellow. It is necessary to go to jewelry dealers regularly to maintain regular maintenance. 18K gold itself 75%of gold, 25%platinum, copper, nickel and other precious metals, the color depends on the 25%formula, generally light yellow and white. For the beautiful and durability of the jewelry, it is often plated in the appearance of the jewelry. In daily life, it will lead to layer wear (doing housework, cosmetics). After that, the original pale yellow will be exposed, which is normal.
icides to the salesperson cleaning the electroplating, it is OK, and this is related to individuals. Some customers have not changed yellow after wearing it for 3-4 years. It appeared, in fact, because the maintenance of the ring was not in place, try not to let the ring come into contact with cosmetics and other chemicals. Furthermore, even the PT950 ring will be a bit dull after wearing it for a long time, so there is no need to worry about the problem of 18K out of color.
Enjoy jewelry, Le Dafu Diamond Custard should choose the one that suits you. Finger slender people are suitable for simple and generous styles, and they look slender and soft; those with relatively thicker fingers are not old, and they are also suitable for such wedding diamond rings. The fingers are round and elder, suitable for wedding diamond rings with a wider ring wall, and the style of the diamond ring requires a certain shape.
M common diamond ring trachatings include gold, platinum and K gold;